Description
Dosing pump Seko TPG603 is a digital solenoid-driven dosing pump with constant flow rate that can be adjusted manually or with proportional flow rate according to an external analogue (4÷20 mA) or digital pulse signal such as a water meter.
The pump is also equipped with a manual priming pump for the start up and comes complete with a standard installation kit, which includes a PVDF foot filter and injection valve, PVC suction tube and PE delivery tube. As a matter of fact PVDF-T installation kit is available on request.
Dosing pump Seko TPG603 is also available with an AISI316L pump head which provides exceptionally high chemical compatibility with several liquid ends.
Hydraulic Characteristics:
Power Supply:
100÷240Vac
Flow rates:
4.0 l/ph – 12 bar pressure
5.0 l/ph – 10 bar pressure
6.0 l/ph – 8 bar pressure
8.0 l/ph – 2 bar pressure
Max Frequence -Strokes per min:
160
Stroke Capacity (cc/str.):
4.0 l/ph – 12 bar pressure – 0.42
5.0 l/ph – 10 bar pressure – 0.52
6.0 l/ph – 8 bar pressure – 0.63
8.0 l/ph – 2 bar pressure – 0.83
Installation Kit Available:
PVDF-T
PDVF
Seals Available:
FKM-B
EPDM
PTFE
Also with this pump, with only 5 sizes, is possible to cover a wide range of performances, having a flow rate range from 0.4 to 110 l/h and a back pressure from 0.1 to 20 bar. The power supply is 100÷240 Vac – 50/60 Hz, therefore the same pump can operate with different supply voltage. The standard pump head is in PVDF, therefore high chemical compatibility with several liquids end but is available in PVC as well, on request.
