13" Diameter DMI65 Iron Removal System With Manual Backwash

12″ Diameter DMI65 Iron Removal System With A Manual Backwash Head

R9,859.93

INCLUDING VAT

Please note that shipping and installation is not included.

Iron and manganese in drinking water can impart a metallic taste, can cause the water to be discolored, and can stain plumbing fixtures and laundry. Iron and manganese can affect the color and flavor of your water. They may react with tannins in coffee and tea to produce a sludge, which affects taste and appearance.

The unique micro-porous structure of DMI-65 efficiently removes dissolved iron to as low as 0.001 ppm and manganese to 0.001 ppm. The DMI-65 acts as an oxidation catalyst with immediate oxidation and filtration of the insoluble precipitates.

SKU: WC-WE-1252IM Category: Tags: , , , , , , , , , , , , , , , , , , ,

Description

12″ Diameter DMI65 Iron Removal System With A Manual Backwash Head

DMI-65 is a catalytic filtration media designed specifically for the removal of iron and manganese found present in water sources. Surprisingly it does not require the use of potassium permanganate whatsoever, and is changing the world of filtration media for good! Indeed its special micro porous.

By and large DMI-65 is a revolutionary Infusion Technology catalytic filtration media designed for the removal of iron and manganese without the use of potassium permanganate. Thus the unique micro-porous structure of DMI-65 efficiently removes dissolved iron to as low as 0.001 ppm and manganese to 0.001 ppm. Thereupon the DMI-65 acts as an oxidation catalyst with immediate oxidation and filtration of the insoluble precipitates. Undeniably the media has been used extensively in a wide variety of applications for over 30 years

Technical Datasheet for DMI-65®: Iron & Manganese

Firstly iron 2ppm – Manganese 1ppm = LV 8 – 9m3/m2/hour as close to pH 7.5 – 8 as possible. If the Iron concentration is higher than 2ppm and has some manganese, than slow LV down to between perhaps 7 – 8m3/m2 hour and maintain pH as close to 7.5 – 8 as possible.

Advantages of DMI-65

  • Eliminates Potassium Permanganate. Operates with continuous injection of sodium hypochlorite at low residual levels (0.1 to 0.3 ppm).
  • Wide pH range. Stable and satisfactory performance at pH 5.8 to 8.6.
  • High Flow Rates. DMI-65 can operate at linear filtration velocities up to twice that of conventional media with a Higher Operating Temperatures. Maximum operating temperature of 113° F (45° C).
  • Long Life. DMI-65 is not consumed in the process
  • providing considerable advantages over other processes or media.
  • Regeneration Not Required. After initial activation
  • only sodium hypochlorite feed is required.
  • System Compatibility. Physical properties are similar to that of competitive media
  • allowing conversion to DMI-65 without major hardware modifications.
  • Arsenic Removal. DMI-65 has been shown to be effective in the removal of arsenic associated with iron-containing influent. If necessary
  • ferric chloride can be introduced to treat waters with low influent iron levels or to enhance removal when treating waters with high levels of arsenic.

12″ Diameter DMI65 Iron Removal System With A Manual Backwash Head

12″ Diameter DMI65 Iron Removal System With A Manual Backwash Head

You may also like…

Related products