Description
Firstly DAB pump controller 1.1kW device designed to control the pump‘s starting and stopping based on demand. It stops the pump when there is no water and protects it from dry running. Also it can be mounted on surface and submersible pumps alike. The compact device is reliable and designed, above all, for residential applications
DAB pump controller 1.1kW can be mounted on the actual pump or between the pump and the first point of use. To put the device into operation, simply perform the wiring and supply power. From now on, Quick Press will start and stop the pump based on water demand (opening and closing). If there is a power outage, the unit restarts automatically when power is resumed.
The control panel is designed to indicate run status and report any operating issues.
Technical Data
- Supply voltage: 1×230 Vac (+/- 10%) 50/60 Hz
- Max. current: 12 A
- Output: 1,1 – 2.2 kW
- Protection rating: IP65
- Max. working pressure: 10 bar
- Minimum flow rate: ≈ 1 l/min
- Male connection: 1’’ BSP
- Restart pressure setting: 1,5 Bar (non-adjustable)
- Max. working temperature: 60°C
- Certifications for drinking water use: ACS e AS/NZ 4020
The pump to be paired with the pump controller must not only meet the system‘s water demand, but must also produce 1.5 bar more pressure than the Quick Press restart pressure. When there is a water demand, namely when fixtures are opened, Quick Press‘s preset restart pressure (1.5 bar) must overcome the back pressure generated by the water column exerting pressure on the pump. Hence Quick Press‘s restart pressure must be at least 0.5 bar higher than the back pressure generated by the height of the water column.
