Description
Please Note:
When you consider purchasing this system, you need to know the following information as it is very important.
Straightaway this system requires a pretreatment setup for it to perform to its maximum capacity.
Below, the sketch shows a basic pretreatment setup with the reverse osmosis system.
Application raw waterTap water, city water, groundwater, well waterRO MembraneVontron, DowPrecision filterPP, CTO
Capacity | 250L/H |
Voltage | 220V/50Hz |
Recovery | 45%-50% |
Desalination | 96%-99% |
Feed PH range: | 3-10 |
Membrane Qty | 1pcs |
Temp of raw water | 1-45℃ |
Feed Water Pressure | 1-5 bar |
Raw water TDS | 0-1000ppm |
Item name | Material |
High-pressure pump | SS202 |
RO Membrane | Aromatic polyamide |
Membrane housing | SUS |
Flowmeter | plastic pipe |
Conductivity meter | engineering plastics |
Pressure switch | brass |
Electronic control system | Air switch.electric relay.alternating current contractor.switch.LED |
Control box | Mild steel /ss202 |
Frame | SUS304 |
Pipe | “2 inch,HP pipe:ss202 LP pipe:UPVC” |
Capacity (GDP/LPH): 2000/300
Working Pressure (PSI/BAR): 150-200/10-14
Pre-Filtration: (20″ Filter Housing x2) + (20″ PP Cartridge 5u + 1u)
Booster Pump: Vertical Multistage Pump
MEMBRANE
- Material: T.F.C with FRP outer wrap
- Size + Unit: 4040 x 1