Description
Please Note:
When you consider purchasing this system, you need to know the following information as it is very important.
This system requires a pretreatment setup for it to perform to its maximum capacity.
Below, the sketch shows a basic pretreatment setup with the reverse osmosis system.
The above pretreatment setup is not guaranteed to work unless recommended by a sales agent according to the water analysis report from a lab.
A water analysis report is very important as it determines the pretreatment setup needed to be installed before the reverse osmosis system. As you can see on the sketch above, the pretreatment consists of a Sand/Glass Filter, Carbon Filter, and Antiscalant Dosing system.
Pretreatment setups can consist of even more items installed before the reverse osmosis system. Below is a list of items that could be required as per the water analysis report.
- Chlorine Dosing System
- Ultrafiltration System
- Dmi-65 Iron Removal Media Filter System
- Ozone Generator
- Flocculant System
Once all the equipment has been purchased, you will need a qualified technician to put together the complete setup. We have our own qualified technicians train by the manufacturers of the equipment to do the installation running of the setup. Should you require us to install the system for you, a quote with the installation fee will be sent to you by the sales agent in charge.
Training can also be offered to the guys you want to be the ones installing your setup instead of our technicians.
Benefits
- Specialized Micro-Computer Controller
- Fully Equipped and Customizable
- Factory Tested and Preserved
- 1-Year Limited Warranty
- Manufactured in Taiwan
Standard Features Of The Reverse Osmosis System
- RO micro-computer controller with permeate TDS readout
- 300PSI stainless steel membrane housing+PE end caps
- LPE multistage pump for 1500-8000GPD
- 5-micron sediment pre-filter x 2 in series
- Rotameters for permeate and concentrate stream
- Pressure gauges for prefilter feed and Reverse Osmosis feed
- Low-pressure switch
- SS316 concentrate needle valve
- Concentrate recycling valve (without flow meter)
- The electro-plated SS304 skid frame
Available Options
- RO membranes available with brands of Filmtec, Hydranautics, Vontron, and Toray
- FRP membrane vessel
- Grundfos multistage pump
- CNP multistage pump
- Concentrate recycling flow meter
- Provision for CIP
| Models | RA 8000 |
|---|---|
| Feed Water TDS | <1500ppm |
| Recovery Rate* | 50-75% |
| Vessel Array | 1:1:1:1 |
| Vessel Size | 4040 x 4 |
| Permeate Flow Rate (GPM/lpm)** | 4.2/15.8 |
| Feed Connection | 3/4″ FNPT |
| Permeate Connection | 1/2″ |
| Concentrate Connection | 1/2″ |
| Flush Connection | 1/2″ |
| Pump type & Motor HP | Multistage 2HP |
| Gross Dimension (cm) | 69X63X147 |
| Gross Weight (kg) | 100 |
