Description

The IP-W260-2C is a counter-top water purifier and dispenser designed to provide filtered hot and cold drinking water directly from a connected water supply.

The unit combines a 4-stage filtration system with ultra-filtration (UF) and UV treatment to provide convenient drinking-water purification without adding chemical disinfectants. The filtration system consists of PPF, UDF, UF and T33 filtration stages, while the built-in 6W UV system provides additional microbial treatment.

The IP-W260-2C provides both hot and cold water from a compact counter-top design, making it suitable for homes, offices, kitchens, reception areas and other locations requiring convenient access to treated drinking water.

Features:

• Complete IP-W260-2C counter-top water purifier and dispenser.
• Counter-top design.
• Direct connection to a suitable water supply.
• 4-stage filtration system.
• PPF sediment filtration.
• UDF activated carbon filtration.
• UF membrane filtration.
• T33 activated carbon filtration.
• Built-in 6W UV treatment.
• Hot and cold water dispensing.
• 304 stainless-steel water tanks.
• Compressor cooling system.
• Automatic water production after connection to the water supply.
• Hot water temperature of approximately 85–95°C.
• Cold water temperature of approximately 5–10°C.
• Compact design for domestic and workplace applications.
• Suitable for compatible municipal water supplies.

Specifications:

• Product type: Counter-Top UF water purifier and water dispenser.
• Filtration system: 4-stage PPF + UDF + UF + T33.
• UV treatment: 6W UV.
• Filtration technology: Ultra-Filtration (UF).
• Water supply: Direct connection to a suitable water source.
• Rated voltage: 220–240V.
• Frequency: 50/60Hz.
• Heating power: 420W.
• Heating capacity: 5 L/h.
• Hot water temperature: 85–95°C.
• Hot water tank capacity: 1.5L.
• Cooling power: 90W.
• Cooling capacity: 2 L/h.
• Cold water temperature: 5–10°C.
• Cold water tank capacity: 3.2L.
• Water tank material: 304 stainless steel.
• Inlet water pressure: 0.1–0.4 MPa.
• Water flow: Up to 60 L/h.
• Rated purified water amount: 2,000L.
• Body material: Galvanised sheet iron and ABS plastic.
• Connection type: Food-grade silicone tubing.

Filtration Stages:

• Stage 1: PPF: Helps reduce suspended sediment and particulate matter from the incoming water.
• Stage 2: UDF: Activated carbon filtration helps reduce chlorine, tastes and odours.
• Stage 3: UF: The ultra-filtration membrane provides fine physical filtration.
• Stage 4: T33: Activated carbon polishing helps improve the taste and odour of the treated water.
• UV Treatment: The built-in 6W UV system provides additional UV treatment as part of the purification process.

Applications:

• Homes.
• Offices.
• Kitchens.
• Reception areas.
• Small workplaces.
• Shops.
• Clinics and similar facilities.
• Restaurants and hospitality areas.
• Direct-drinking-water applications.
• Locations requiring convenient hot and cold filtered water.

Why choose the IP-W260-2C water dispenser?

• 4-stage filtration: Combines sediment, carbon, UF and carbon polishing stages in one system.
• UF purification: Uses physical membrane filtration without requiring chemical treatment.
• Built-in UV: Adds UV treatment to the purification system.
• Hot and cold water: Provides both temperature options from one compact unit.
• Counter-top design: Designed to fit conveniently on a suitable counter or work surface.
• 304 stainless-steel tanks: Provides corrosion-resistant water-contact tank construction.
• Direct water connection: Produces treated water from a connected water supply.
• Compact solution: Combines purification and dispensing in a single appliance.
• Convenient drinking water: Provides filtered water without the need to manually fill and lift large water bottles.

How the IP-W260-2C water dispenser works:

• Water enters the unit from the connected water supply.
• The water passes through the 4-stage PPF, UDF, UF and T33 filtration system.
• The filtered water receives additional UV treatment.
• Treated water is stored in the internal water tanks.
• The cooling system provides chilled water at approximately 5–10°C.
• The heating system provides hot water at approximately 85–95°C.
• The required water temperature can then be dispensed directly from the unit.

Installation & maintenance:

• Install the unit on a stable, level counter or suitable work surface.
• Connect the unit only to a suitable water supply within the specified inlet pressure range.
• Use food-grade tubing and suitable fittings for the water connection.
• Ensure the water supply is suitable for the filtration system.
• Flush the filtration system according to the manufacturer’s instructions before drinking the water.
• Replace filter cartridges according to water quality, usage and manufacturer’s recommendations.
• Maintain the UF membrane according to the manufacturer’s maintenance requirements.
• Keep the unit and surrounding area clean and dry.
• Ensure adequate ventilation around the cooling system.
• Do not block ventilation openings.
• Disconnect the electrical supply before carrying out electrical maintenance.
• Do not operate the unit if electrical components, tubing or water connections are damaged.
• Inspect the water connections periodically for leaks.
• Maintain the UV system according to the manufacturer’s requirements.

Important water quality information:

The IP-W260-2C is designed for compatible treated or municipal water supplies. Where the incoming water source is borehole, rainwater, surface water or otherwise of uncertain quality, a suitable water analysis should be carried out before installation.

Additional pre-treatment may be required where the incoming water contains excessive sediment, iron, manganese, hardness, dissolved solids or other contaminants that could affect the filtration system.

Warranty & electrical safety:

This appliance contains electrical heating, cooling, filtration and UV components. Suitable electrical protection and surge protection are recommended to help protect the unit from voltage fluctuations and electrical surges.