Description
Please Note:
When you consider purchasing this system, you need to know the following information as it is very important.
Firstly this system requires a pretreatment setup for it to perform to its maximum capacity.
In any case below, the sketch shows a basic pretreatment setup with the reverse osmosis system.
The above pretreatment setup is not guaranteed to work unless recommended by a sales agent according to the water analysis report from a lab.
The reverse osmosis system requires a specific pretreatment setup based on the findings in the water analysis report. As can be seen on the sketch above, the pretreatment consists of a Sand/Glass Filter, Carbon Filter, and Antiscalant Dosing system.
Before installing a reverse osmosis system, additional items may be required for the pretreatment setup. Furthermore below is a list of items that could be required as per the water analysis report.
- Chlorine Dosing System
- Ultrafiltration System
- Dmi-65 Iron Removal Media Filter System
- Ozone Generator
- Flocculant System
Once all the equipment has been purchased, you will need a qualified technician to put together the complete setup. Obviously we have our own qualified technicians train by the manufacturers of the equipment to do the installation running of the setup. If you need us to install the system for you, the sales agent in charge will send a quote with the installation fee to you.
The technicians can be replaced with trained people to install your setup.
Specifications
- Feed Water TDS: <1500ppm
- Recovery Rate: 34-75%
- Vessel Array: 1:1
- Vessel Size: 4040 x 2
- Permeate Flow Rate (GPD/LPM): 2.1/7.9 Feed Connection: 3/4” FNPT
- Permeate Connection: 1/2” Concentrate Connection: 1/2”
- Flush Connection: 1/2”
- Pump Type & Motor HP: Multistage 2HP
- Gross Dimension (cm): 69 x 63 147
- Gross Weight (kg): 88
Standard Features Of The Industrial Reverse Osmosis System
- RO micro-computer controller with permeate TDS readout
- 300PSI stainless steel membrane housing+PE end caps
- ROTEK LPE multistage pump for 1500-6000GPD
- 5-micron sediment pre-filter x 2 in series
- Rotameters for permeate and concentrate stream
- Pressure gauges for prefilter feed and RO feed
- Low-pressure switch
- SS316 concentrate needle valve
- Concentrate recycling valve (without flow meter)
- The electro-plated SS304 skid frame
- Moreover from packaged systems to custom-engineered Reverse Osmosis systems, we can take care of your needs.
Benefits Of The Industrial Reverse Osmosis System
- Specialized Micro-Computer Controller
- Fully Equipped and Customisable
- Factory Tested and Preserved
- 1-Year Limited Warranty
