Description

The DAB K 36/200 T is a robust single-impeller centrifugal pump designed for reliable water transfer and supply in domestic, commercial, civil, agricultural and industrial applications.

With a 2.2 kW (3 HP) three-phase motor, the K 36/200 T operates on 3 × 230–400 V at 50 Hz and provides a maximum head of approximately 36.6 metres, with a maximum flow of approximately 18 m³/h within its published performance range.

The pump is suitable for pumping clean water and liquids with characteristics similar to water. It features a robust cast-iron pump body and motor support, a technopolymer impeller, stainless-steel shaft and carbon/ceramic mechanical seal.

The DAB K 36/200 T is suitable for applications including water transfer, irrigation, water supply, tank filling, pressure boosting, water treatment and industrial water systems, where dependable centrifugal pumping performance is required.

Features:

• DAB model: K 36/200 T
• Product code: 60146040.
• Pump type: Single-impeller centrifugal pump.
• Motor: Three-phase asynchronous motor.
• Motor power: 2.2 kW / 3 HP.
• Motor type: IE2.
• Power supply: 3 × 230–400 V.
• Frequency: 50 Hz.
• Rated speed: Approximately 2,860 rpm.
• Maximum head: 36.6 m.
• Maximum flow: Approximately 18 m³/h.
• Maximum working pressure: 8 bar / 800 kPa.
• Suction connection: 2″ G.
• Discharge connection: 1¼” G.
• Pump body: Cast iron.
• Motor support: Cast iron.
• Impeller: Technopolymer.
• Shaft: Stainless steel.
• Mechanical seal: Carbon / ceramic.
• O-Ring: EPDM rubber.
• Installation: Horizontal or vertical, with the motor positioned above the pump.
• Maximum ambient temperature: +40°C.
• Pumped liquid temperature: -10°C to +50°C.
• Protection: IP44 / IP55 at terminal box, according to the applicable DAB documentation.
• Insulation Class: F.

Specifications:

• Pump configuration: Single impeller.
• Motor configuration: Three-phase.
• Nominal motor power P2: 2.2 kW.
• Motor rating: 3 HP.
• Maximum motor input P1: 3.0 kW.
• Voltage: 3 × 230–400 V.
• Frequency: 50 Hz.
• Nominal current: 9.0 / 5.2 A.
• Motor efficiency class: IE2.
• Motor speed: 2,860 rpm.
• Maximum head: 36.6 m.
• Maximum flow: 18 m³/h.
• Suction port: 2″ G.
• Discharge port: 1¼” G.
• Maximum operating pressure: 8 bar / 800 kPa.
• Liquid temperature: -10°C to +50°C.
• Maximum ambient temperature: +40°C.
• Pump body material: Cast iron.
• Motor support material: Cast iron.
• Impeller material: Technopolymer A.
• Shaft material: AISI 303 stainless steel.
• Mechanical seal: Carbon / ceramic.
• Seal o-ring: EPDM rubber.
• Insulation class: F.
• Protection rating: IP44 / IP55 terminal box.

Applications:

• Domestic water supply systems.
• Commercial water supply.
• Civil water installations.
• Industrial water systems.
• Agricultural water systems.
• Irrigation systems.
• Water transfer between tanks.
• Water storage tank filling.
• Pressure boosting systems.
• Water treatment installations.
• Water purification systems.
• Water filtration systems.
• Water plant installations.
• Process-water transfer.
• Clean-water circulation and transfer.
• Decanting applications.
• Mixing applications.
• General water-transfer duties.