Ultrafiltration system manual – 1000LPH UF

R18,414.38

INCLUDING VAT

Please note that shipping and installation is not included.

Ultrafiltration System – 1000LPH UF Manual Control

This is not a Reverse Osmosis Purifier – but uses Ultra Filtration Technology Instead

Ultrafiltration (UF) filtrates in the 0.01-micron range.  The element comprises of hollow fibers of membrane material.  UF is a type of membrane filtration in which hydrostatic pressure forces a liquid against a semipermeable membrane.  It does not differ fundamentally from reverse osmosis, microfiltration or nanofiltration, except in terms of the size of the molecules it retains.  UF can be used as pretreatment for reverse osmosis systems or as a final filtration stage for deionized water.  It is an excellent purification method in areas where the TDS is low or in drought-stricken areas, as it produces no waste.

Items are subject to availability

Description

Ultrafiltration System – 1000LPH UF Manual Control

Product Features

  • Inlet pressure: below 3bar
  • Back washing pressure: 2bar
  • Produce capacity: 1000L/H
  • Operating type: full manual, no automatic

Product Parts

  • Product water valve
  • Back washing inlet water valve
  • Inlet valve
  • Rinse drain water valve
  • Back washing drain water valve
  • Produce water flow meter
  • Wastewater flow meter

How to run the machine?

  • Before start operating the machine, there are 3 connection should be done :
  • Connect the raw water, from the 3 stages blue filter housing, the size is 1’’;
  • Connect product water tank or water use site from the pipe of the produced water flow meter, the size is 1’’;
  • Connect the wastewater pipe from the pipe with a wastewater flow meter, for recycle, or drain out.

Ultrafiltration System – 1000LPH UF Manual Control

This is not a Reverse Osmosis Purifier – but uses Ultra Filtration Technology Instead

Another key point Ultrafiltration (UF) filtrates in the 0.01-micron range. By all means the element comprises of hollow fibers of membrane material. As a matter of fact UF is a type of membrane filtration in which hydrostatic pressure forces a liquid against a semipermeable membrane.

For the most part it does not differ fundamentally from reverse osmosis, microfiltration or nanofiltration, except in terms of the size of the molecules it retains.  UF can be used as pretreatment for reverse osmosis systems or as a final filtration stage for deionized water.  It is an excellent purification method in areas where the TDS is low or in drought-stricken areas, as it produces no waste.

Ultrafiltration (UF) is used to remove essentially all colloidal particles (0.01 to 1.0 microns) from water and some of the largest dissolved contaminants. The pore size in a UF membrane is mainly responsible for determining the type and size of contaminants removed.
Ultrafiltration system manual – 1000LPH UF