Description
Firstly the DAB KPF Peripheral centrifugal pump with controller 0.37kW with compact dimensions. Able to generate high heads and suitable for domestic installations, water supply systems, small gardening applications, draining and filling cisterns, and for small industrial uses.
Operating range: from 5 to 50 l/m with head up to 84 meters.
Brass pump body and motor support for KP 60/6 and KP 60/12. Cast iron pump body with radial suction for KP and KPS, frontal suction for KPF.
Brass impeller. Carbon/ceramic mechanical seal. IP44.
Liquid temperature range: from 0 °C to +35 °C for domestic use, from -10°C to +50°C for other uses.
Controller Data:
- Supply voltage: 1×230 Vac (+/- 10%) 50/60 Hz
- Max. current: 12 A
- Output: 1,1 – 2.2 kW
- Protection rating: IP 65
- Max. working pressure: 10 bar
- Minimum flow rate: ≈ 1 l/min
- Male connection: 1’’ BSP
- Restart pressure setting: 1,5 Bar (non-adjustable)
- Max. working temperature: 60°C
The controller on the DAB KPF Peripheral centrifugal pump with controller 0.37kW. Quick Press is an on/off device designed to control the pump‘s starting and stopping based on demand. It stops the pump when there is no water and protects it from dry running. It can be mounted on surface and submersible pumps alike. The compact device is reliable and designed, above all, for residential applications.
Correct quick press/pump pairing
The pump to be paired with the Quick Press device must not only meet the system‘s water demand, but must also produce 1.5 bar more pressure (with fixtures closed Q=0) than the Quick Press restart pressure. When there is a water demand, namely when fixtures are opened, Quick Press‘s preset restart pressure (1.5 bar) must overcome the back pressure generated by the water column exerting pressure on the pump. Hence Quick Press‘s restart pressure must be at least 0.5 bar higher than the back pressure generated by the height of the water column.
