Description

The DAB K 14/400 T is a robust and reliable single-impeller centrifugal pump fitted with a 1.85 kW (2.5 HP) IE3 three-phase motor. Designed for clean-water applications, it is suitable for domestic, commercial, industrial, agricultural and irrigation systems, as well as water transfer, water treatment and general water-supply applications.

The pump features a durable cast-iron pump body and motor support, technopolymer impeller and carbon/ceramic mechanical seal, providing dependable performance and long service life. With a maximum head of approximately 19 metres and a maximum listed flow of 36 m³/h, the DAB K 14/400 T is a versatile solution for a wide range of water pumping requirements.

Features:

• DAB K Single-Impeller Series
• Model: K 14/400 T.
• 1.8 kW class centrifugal pump.
• 1.85 kW / 2.5 HP nominal motor output.
• Three-phase IE3 motor.
• 3 × 230–400 V, 50 Hz power supply.
• Single-impeller centrifugal design.
• Robust cast-iron pump body.
• Cast-iron motor support.
• Technopolymer impeller.
• Carbon/ceramic mechanical seal.
• Enclosed asynchronous motor.
• External ventilation cooling.
• Designed for clean-water applications.
• Suitable for domestic, civil, industrial and agricultural systems.
• Suitable for transfer, decanting, mixing and irrigation.
• Horizontal or vertical installation.
• Motor must remain above the pump when installed vertically.
• Maximum working pressure of 6 bar.
• Maximum ambient temperature of +40°C.
• IP44 motor protection.
• IP55 terminal board protection.
• Class F insulation.
• Current DAB version uses an IE3 motor.
• Three-phase motor protection should be provided with a suitable motor protector in accordance with applicable standards.

Specifications:

• Brand: DAB pumps.
• Series: K Single impeller.
• Model: K 14/400 T.
• DAB product code: 60179855.
• Pump type: Single-impeller centrifugal pump.
• Motor type: Three-phase asynchronous motor.
• Motor efficiency: IE3.
• Nominal motor output (P2): 1.85 kW.
• Motor power: 2.5 HP.
• Marketing power rating: 1.8 kW.
• Maximum input power (P1): 1.9 kW.
• Power supply: 3 × 230–400 V.
• Frequency: 50 Hz.
• Nominal current: 6.0–3.5 A.
• Motor speed: Approximately 2,850 rpm
• Maximum head: 19 m.
• Maximum flow: Approximately 36 m³/h.
• Flow at 12 m³/h: 18.0 m head.
• Flow at 15 m³/h: 16.3 m head.
• Flow at 18 m³/h: 13.8 m head.
• Flow at 24 m³/h: 10 m head.
• Pump body: Cast iron.
• Motor support: Cast iron.
• Impeller: Technopolymer.
• Impeller type: Single impeller.
• Mechanical seal: Carbon / ceramic.
• Pump connections: 2″ G suction and 2″ G discharge.
• Maximum working pressure: 6 bar / 600 kPa.
• Pumped liquid temperature: -15°C to +110°C..
• Maximum ambient tempe.rature: +40°C
• Protection degree: IP44
• Terminal board protection: IP55.
• Insulation class: F.
• Installation: Horizontal or vertical.
• Vertical installation: Motor must remain above the pump.

Applications:

• Domestic water supply.
• Commercial water systems.
• Industrial water systems.
• Agricultural water systems.
• Irrigation systems.
• Water transfer.
• Water storage tank transfer.
• Water treatment installations.
• Water purification systems.
• Water filtration systems.
• RO pre-treatment systems, where the pump duty point is suitable.
• Water plant installations.
• Decanting applications.
• Mixing applications.
• General clean-water pumping.
• Pressure and water-supply systems.