Description

The Seakoo JET100 is a high-head, self-priming jet pump designed for domestic water supply, garden irrigation and water distribution applications. It is suitable for pumping clean water without abrasive particles and can be used with suitable water storage tanks and pressure systems.

The pump features a cast-iron pump body, a two-pole induction motor, a copper motor winding and a mechanical seal designed for reliable operation under suitable working conditions.

Features:

• 0.75 kW (1 HP) motor.
• Self-priming jet pump design.
• Single-phase electrical supply.
• High-head performance for domestic water supply.
• Maximum head of approximately 45 metres.
• Maximum flow rate of approximately 3,500 L/h.
• Cast-iron pump body.
• Brass or nylon impeller, depending on configuration.
• Aluminium motor support.
• Stainless-steel or CS45# motor shaft, depending on configuration.
• Ceramic-graphite mechanical seal.
• 100% copper motor winding.
• Built-in capacitor and thermal overload protection.
• IP44 motor protection rating.

Specifications:

• Brand: Seakoo.
• Model: JET100.
• Product type: Self-Priming Jet Water Pump.
• Rated motor power: 0.75 kW.
• Motor power: 1 HP.
• Voltage: 220–230V AC.
• Phase: Single phase.
• Frequency: 50Hz (confirm the motor nameplate for the exact rating).
• Motor type: Two-pole induction motor.
• Maximum flow rate: Approximately 3,500 L/h (58 L/min).
• Maximum head: 45 metres (approximately 4.5 bar equivalent).
• Maximum suction lift: Up to 9 metres under suitable conditions with a foot valve.
• Maximum liquid temperature: 40°C.
• Maximum ambient temperature: 40°C.
• Maximum working pressure: 6 bar.
• Motor insulation: Class B/class F.
• Motor protection rating: IP44.
• Motor winding: 100% Copper.
• Pump body: Cast iron.
• Motor support: Aluminium.
• Impeller: Brass or nylon, depending on configuration.
• Motor shaft: Stainless steel or CS45# steel, depending on configuration.
• Mechanical seal: Ceramic-graphite.
• Capacitor: Included.
• Thermal overload protection: Included.
• Inlet connection: 25mm (1 inch), verify the actual thread configuration.
• Outlet connection: 25mm (1 inch), verify the actual thread configuration.

Applications:

• Domestic water supply.
• Water transfer from storage tanks.
• Garden irrigation.
• Water pressure boosting.
• Water lifting and distribution.
• Small to medium pressure systems.
• Suitable wellpoint applications, subject to the installation and suction conditions.